Introduction: A 100 kg RAL 3001 trial order depends on color match, sample timing, packaging, and EXW freight planning, and all four decisions have to be settled before the powder leaves the plant.
A job coater often needs a small single-color batch to quote an end customer, run a trial, or test a new substrate. Finding a red powder is easy. Many powder coating manufacturers and powder coating powder suppliers can quote a red shade, but a job coater needs the right RAL 3001 Signal Red, a result that works on their line, and clear terms for 100 kg, 20/25 kg cartons, samples, and EXW delivery. A practical order starts with color and substrate, then moves to samples, packaging, and MOQ, then freight and lead time.
RAL 3001 is a signal red in the RAL Classic system. The color reference gives buyers, sellers, and spray operators a shared starting point, but the finish on the part is what the end customer sees. EP0S-320024 is a RAL 3001 Signal Red, smooth semi-gloss interior pure epoxy powder coating with 40-80 GU at 60°, LAB 39.87/42.42/23.43, and RGB 162/59/58. These values describe the target shade and give the sample panel a measurable reference. The same powder can still look different when gloss, film thickness, or cure changes, so approve color on a sprayed panel, not on powder alone. Adhesion and final appearance depend on clean, properly profiled metal. EP0S-320024 is used for interior parts, automotive components, pipe surfaces, and primer layers under a topcoat. Film thickness from 60 to 500 μm gives room for high-build coverage, edge protection, and chemical resistance. Standard cure is 200°C x 10 min at part temperature, and a customized low-temperature cure down to 120°C is available on request for heat-sensitive or heavy parts. For long-term outdoor exposure, use this epoxy as a primer with a suitable topcoat; pure epoxy used alone suits interior duty and primer layers rather than single-layer weathering. When a job coater quotes a customer, agree the substrate and cure schedule before placing the order because they affect adhesion, color, and the final film. Surface preparation deserves the same attention as the color number: blasted or chemically pre-treated steel with the correct profile anchors the powder far more reliably than a smooth, oily, or partially rusted surface, and a poor substrate will show through even a perfectly matched shade on the first inspection.
A small RAL 3001 order is easier to approve when the sample, pack size, and MOQ match the way your line works. Resolve these details before the 100 kg batch arrives, because each one changes either the trial risk or the handling cost on the shop floor.
Standard samples are free and can include 2 panels, 800 g of powder, or both. Dispatch is arranged within 72 hours, and the buyer pays international freight. For a job coater, the sample test should go beyond a quick visual check of the powder. Spray the sample on the same substrate you will use in production, at a film thickness close to the target, and cure it on the same schedule you plan to run. Compare the result under the customer's lighting and against the RAL 3001 reference. Check gloss, surface smoothness, edge coverage, and whether the shade still matches after overbaking. If your oven runs at 120°C for a heat-sensitive part, confirm the low-temperature cure request early, because it is a customized option rather than a default line setting, and the request has to be agreed before the powder is produced.
EP0S-320024 comes in 20 kg or 25 kg cartons with a PE liner. The choice depends on how you mix and store the powder. A 20 kg carton is easier to handle in small mixing or fluidized-bed trials, while 25 kg cartons reduce box count on larger 100-300 kg runs. If you order several cartons, ask for the same batch and keep the liner sealed until use. Store powder cool and dry, away from direct sunlight and moisture, because a damp liner can cause lumps and feeding problems. The MOQ is 100 kg, so a single-color trial can stay small while still meeting the supplier's production threshold. Prices are on request. Ask for a quotation that states packaging format, quantity, and target delivery region, and confirm whether the quote covers one batch number or allows split batches, since mixed batches make color control harder to defend if the end customer inspects the finished parts.
EXW means the buyer takes responsibility for collecting the goods and arranging export clearance, freight, duty, and delivery after pickup. For a 100 kg order, the powder price is only one part of the landed cost. Carton dimensions and weight affect freight class, and the destination country affects duty and customs charges. Calculate the full cost before quoting an end customer: EXW price plus pickup, export handling, international freight, insurance, duty, customs clearance, and local delivery. Sample freight is separate and paid by the buyer. If the delivered cost looks tight, adjust the order quantity within the 100-300 kg range or compare 20 kg and 25 kg carton configurations to reduce handling and shipping waste. Lead time for standard EP0S-320024 is 1-7 working days, which helps when a customer needs a fast trial or a replacement batch. Custom low-temperature cure may need extra confirmation because it is made on request. A sensible sequence is to approve the sample, confirm the color and cure schedule, place the 100 kg order, and then book freight while production is running. Ask for the batch COA, carton weights, and packing list early, and use those numbers rather than estimates when you forward a landed cost to your own customer. VeriCoating supports RAL 3001 small-batch sourcing with a 100 kg MOQ, 20 kg or 25 kg packaging, free standard samples arranged within 72 hours, and EXW pricing on request. The next step is to send the substrate, target film thickness, cure temperature, and required color reference, then request a sample or quotation for the exact trial quantity.
RAL 3001 small-batch sourcing works best as a sequence, not a single price comparison. Confirm the color reference and substrate first, spray a sample under production conditions, choose packaging that fits your mixing volume, and calculate the true EXW landed cost before you quote your own customer. With a 100 kg MOQ, 20 kg or 25 kg cartons, 1-7 working day lead time, and a 72-hour sample arrangement, a job coater can move from a sourcing question to a practical inquiry. Share your cure schedule, film thickness, and delivery country to get the sample, packaging, and quotation details that match your line.
A: It usually involves confirming the RAL 3001 Signal Red target, checking substrate and cure conditions, requesting a free standard sample, choosing 20 kg or 25 kg cartons, and meeting the 100 kg MOQ. The buyer also plans EXW freight, duty, and delivery costs before quoting an end customer.
A: Yes. Standard samples are free and can include 2 panels, 800 g of powder, or both, with dispatch arranged within 72 hours. The buyer pays international sample freight. Spray the sample on your production substrate and cure schedule so the color, gloss, adhesion, and edge coverage match the planned RAL 3001 order.
A: EXW pricing covers the powder at the pickup point, so the buyer arranges export clearance, freight, insurance, duty, customs, and local delivery. For a small order, those costs can be a large share of the total. Ask for carton weights and dimensions early, then compare freight options before confirming the 100 kg RAL 3001 batch.
RAL 3001 Signal red (RAL Classic)
Incoterms® 2020 - ICC - International Chamber of Commerce