RAL 9003 Signal White Fine texture Powder Coating
HY0F-100101 · Epoxy-Polyester Hybrid
- GLOSS
- Ultra Matt 0-10GU
- CURING
- 200°C × 10 min (workpiece temperature); low-temperature-curing products down to 150°C are available
- KEY FEATURE
- Sand-textured decorative effect
- LEAD TIME
- 1-7 days
Product Overview
Description
HY0F is an epoxy/polyester hybrid interior textured powder coating positioned for low-gloss sand-textured appearance and hiding-oriented decorative coating. It combines chemical resistance, corrosion resistance, a three-dimensional matt appearance, hiding capability and coating yield. The curing temperature can be reduced to 150°C, making it suitable for interior coating programs requiring a sand-textured finish and rapid line setup.
Key Features
- Sand-textured decorative effect;
- good chemical and corrosion resistance;
- matt appearance with a pronounced three-dimensional effect;
- good hiding capability; high coating yield.
Best Suited For
- Furniture and appliances;
- Exercise equipment;
- Office desks and chairs;
- Electrical cabinet and signal cabinet enclosures.
- Packaging
- 20kg or 25kg / box, mcardboard box lined with a polyethylene plastic bag
- Storage
- Store sealed below 25°C ,keep cool, dry, and away from sunlight.
- Shelf Life
- 6–12 months under the specified storage conditions in unopened packaging. The actual product specification shall apply.
- MOQ
- 100kg
Appearance & Properties
| Parameter | Value |
|---|---|
| Chemistry | Epoxy Polyester Hybrid |
| Color Values | LAB: 94.48, -0.56, 0.62 RGB: 239, 239, 238 |
| Gloss at 60° | Sand texture ≤10 GU |
| Specific Gravity | 1.3–1.8 g/cm³, depending on colour and texture effect |
Application & Processing
| Parameter | Value |
|---|---|
| Curing Conditions | 200°C × 10 min (workpiece temperature); low-temperature-curing products down to 150°C are available |
| Application Guidelines | Suitable for manual or automatic electrostatic spray application. Other application methods, such as tribostatic spraying or electrostatic fluidized-bed coating, must be specified in advance. Trial application is required for new products or when process conditions change. Customers shall regularly inspect the quality of the applied and cured coating film. Test methods shall refer to the applicable national standards or company test methods. |
Performance Test Results
| Test | Result | Standard |
|---|---|---|
| Initial Adhesion | Pass, GT0 | ISO 2409 |
| Impact Resistance | 50 kg·cm, no coating detachment from the substrate under direct impact (except low-gloss products) | GB/T 1732 |
| Conical Bend | 5 mm, no visible cracking (except low-gloss products) | ISO 6860 |
| Cupping Test | ≥5 mm, no obvious cracking | ISO 1520:2006 |
Supply & Documents
Not sure this product matches your line?
Use the technician chat to discuss your substrate, pretreatment and curing conditions with our coating team. Pricing and sample requests can be handled in the same conversation.