RAL 8028 Terra Brown Fine texture Powder Coating
PT0F-600282 · General Industrial Exterior Polyester
- GLOSS
- Ultra Matt 0-10GU
- CURING
- 200°C × 10 min (workpiece temperature); minimum 160°C low-temperature curing available
- KEY FEATURE
- Fine and coarse sand-textured decorative effects
- LEAD TIME
- 1-7 days
Product Overview
Description
PT0F is a polyester-TGIC sand-textured powder coating for general industrial exterior decorative protection. It is a TGIC-based system intended for markets outside Europe, with weathering durability of 3–8 years and low-temperature curing down to 160°C through formulation adjustment. Conventional sand-textured products may contain PFAS-restricted substances, so target-market regulatory requirements should be checked.
Key Features
- Fine and coarse sand-textured decorative effects;
- good weathering and corrosion resistance;
- stable matt appearance;
- good hiding effect and high coating yield;
- weathering durability of 3–8 years.
Best Suited For
- Energy-storage cabinets, electrical cabinets and equipment housings;
- Outdoor furniture;
- Outdoor railings and lighting equipment;
- Smart logistics racking;
- Packaging
- 20kg or 25kg / box, mcardboard box lined with a polyethylene plastic bag
- Storage
- Store sealed below 25°C ,keep cool, dry, and away from sunlight.
- Shelf Life
- 6–12 months when stored under the specified conditions in unopened packaging. The shelf life of the specific product shall prevail.
- MOQ
- 100kg
Appearance & Properties
| Parameter | Value |
|---|---|
| Chemistry | Polyester-TGIC |
| Color Values | LAB: 34.18, 5.36, 8.3 RGB: 94, 77, 67 |
| Gloss at 60° | Sand texture ≤10 GU |
| Specific Gravity | 1.3–1.8 g/cm³, depending on colour and texture |
Application & Processing
| Parameter | Value |
|---|---|
| Curing Conditions | 200°C × 10 min (workpiece temperature); minimum 160°C low-temperature curing available |
| Application Guidelines | Suitable for manual or automatic electrostatic spray application. Other application methods, such as tribostatic spraying or electrostatic fluidised-bed coating, shall be specified in advance. Trial application is required for new products or changes in process conditions. Customers shall regularly inspect the quality of the applied and cured coating. Test methods shall refer to national standards or company test methods. |
Performance Test Results
| Test | Result | Standard |
|---|---|---|
| Initial Adhesion | Pass, Gt 0–1 | ISO 2409 |
| Impact Resistance | 50 kg·cm, no coating detachment under direct impact | GB/T 1732 |
| Hardness | ≥H | ASTM D 3363 |
| Bending | 5 mm, no visible detachment | ISO 1519 |
Supply & Documents
Not sure this product matches your line?
Use the technician chat to discuss your substrate, pretreatment and curing conditions with our coating team. Pricing and sample requests can be handled in the same conversation.