RAL 3001 Signal Red Fine texture Powder Coating
PT2F-300344 · Super Durable Polyester
- GLOSS
- Ultra Matt 0-10GU
- CURING
- 200°C × 15 min (workpiece temperature); low-temperature-curing products can reach a minimum curing temperature of 160°C
- KEY FEATURE
- Fine and coarse sand-textured effects
- LEAD TIME
- 1-7 days
Product Overview
Description
PT2F is a polyester-TGIC textured powder coating positioned for super-durable outdoor decorative protection where long-term weathering performance and a sand-textured finish are required. The product can meet relevant requirements of AAMA 2604 and GB/T 5237.4-2017 (II). Conventional sand-textured systems may involve PFAS restrictions and should be confirmed according to project requirements.
Key Features
- Fine and coarse sand-textured effects;
- excellent weathering and corrosion resistance;
- exportable to the United States and most other countries and regions;
- good hiding effect and high coating yield.
Best Suited For
- Metal curtain walls and high-end aluminium profile panels;
- Outdoor energy-storage equipment;
- Automotive exterior and interior parts;
- EV charging-station housings.
- Packaging
- 20kg or 25kg / box, mcardboard box lined with a polyethylene plastic bag
- Storage
- Store sealed below 25°C ,keep cool, dry, and away from sunlight.
- Shelf Life
- 6–12 months when stored under the specified conditions in unopened packaging. The shelf life of the specific product shall prevail.
- MOQ
- 100kg
Appearance & Properties
| Parameter | Value |
|---|---|
| Chemistry | Polyester-TGIC |
| Color Values | LAB: 39.87, 42.42, 23.43 RGB: 162, 59, 58 |
| Gloss at 60° | Sand texture ≤10 GU |
| Specific Gravity | 1.3–1.8 g/cm³, depending on colour and texture |
Application & Processing
| Parameter | Value |
|---|---|
| Curing Conditions | 200°C × 15 min (workpiece temperature); low-temperature-curing products can reach a minimum curing temperature of 160°C |
| Application Guidelines | Suitable for manual or automatic electrostatic spray application. Other application methods, such as tribostatic spraying or electrostatic fluidised-bed coating, shall be specified in advance. Trial application is required for new products or changes in process conditions. Low-temperature-curing products can reach a minimum curing temperature of 160°C; high-build application and recoating require verification of texture and intercoat adhesion. Customers shall regularly inspect the quality of the applied and cured coating. Test methods shall refer to national standards or company test methods. |
Performance Test Results
| Test | Result | Standard |
|---|---|---|
| Initial Adhesion | Pass, 5B | ASTM D 3359 |
| Impact Resistance | 2.5 N·m, no coating detachment under direct impact | ISO 6272 |
| Hardness | ≥F | ASTM D 3363 |
| Bending | 6 mm, no visible detachment | ISO 1519 |
Supply & Documents
Not sure this product matches your line?
Use the technician chat to discuss your substrate, pretreatment and curing conditions with our coating team. Pricing and sample requests can be handled in the same conversation.