---
title: "EV Charging Stations Powder Coating Applications | VeriCoating"
description: "Powder coatings for EV charging stations and outdoor housings: TGIC textured polyester to AAMA 2604, verified by xenon-arc and cyclic-corrosion testing."
language: "en"
page_type: "application_subfield"
canonical: "https://www.vericoating.com/en/applications/new-energy-power/ev-charging-stations"
source_url: "https://www.vericoating.com/en/applications/new-energy-power/ev-charging-stations"
markdown_url: "https://www.vericoating.com/en/applications/new-energy-power/ev-charging-stations.md"
---

# EV Charging Stations

Powder coatings for EV charging stations and outdoor housings: TGIC textured polyester to AAMA 2604, verified by xenon-arc and cyclic-corrosion testing.

Parent application: [New Energy & Power](https://www.vericoating.com/en/applications/new-energy-power.md)

## Weathering, corrosion protection and texture stability outdoors

EV charging stations include outdoor charger housings, connector holders, cable guards and related facilities. Long-term exposure to ultraviolet radiation, rain, temperature changes and road contamination requires a balance of weatherability, stain resistance and decorative appearance.

Veri Coating offers standard-durable polyester-TGIC textured powder coatings; fine-sand and wrinkle textures effectively conceal substrate imperfections, while weathering performance meets AAMA 2604 requirements and is supported by xenon-arc and cyclic-corrosion testing.

Application notes: Film thickness and texture consistency should be controlled, welds and grounding points require particular inspection, and the recommended film thickness is 70-120 um.

## Product List

Representative powder coating directions for ev charging stations. Final selection should be confirmed by substrate, pretreatment, target performance, film build, curing window and trial spray result.

| Product | Application | System | Finish | Typical target |
| --- | --- | --- | --- | --- |
| EV Charging Stations Powder Coating | EV Charging Stations | Standard-durable TGIC textured polyester | Fine sand / wrinkle texture | AAMA 2604, cyclic corrosion and texture stability |
| EV Charging Stations Protective Powder System | EV Charging Stations | Standard-durable TGIC textured polyester | Fine sand / wrinkle texture | Corrosion, adhesion and service stability |
| EV Charging Stations Appearance-Stable Powder | EV Charging Stations | Standard-durable TGIC textured polyester | Fine sand / wrinkle texture | Colour, gloss and texture consistency |
| EV Charging Stations Process-Verified Coating | EV Charging Stations | Standard-durable TGIC textured polyester | Fine sand / wrinkle texture | Film build, curing and edge coverage review |

[View All Products](https://www.vericoating.com/en/product-list?application=NewEnergyPower&subfield=ev-charging-stations)